Description
SKU: UCA FR5-10MAX
UCAN FLO-ROK® FR5 MAX is a styrene free epoxy acrylate adhesive suitable for year-round use without preconditioning in temperature ranging from -10°C to over 30°C. This versatile two component, high strength anchoring adhesive, provides stress free fastening and is an excellent choice for anchoring & dowelling. A matching static mixing nozzle, as well as FLO-ROK’s low mix ratio sensitivity, ensures thorough, 10:1 mixing of the resin and the hardener. FR5-MAX is available in 2 sizes 10 oz. for small jobs, and 28 oz. that is perfect for high volume applications such as rebar dowelling. UCAN FLO-ROK® FR5 MAX anchoring adhesive is specifically formulated for continuously threaded steel rod and deformed steel reinforcing bar anchoring to resist static, wind or earthquake (Seismic Design Categories A through F) tension and shear loads in cracked and un-cracked, normal-weight concrete having a specified compressive strength, f ’c , of 2,500 psi to 8,500 psi (17.2 MPa to 58.6 MPa). The FLO-ROK® FR5 MAX adhesive anchors are designed to be used for floor (vertically down), wall (horizontal) anchoring applications.
FEATURES
- IAPMO – ER0490
- ACI 318 Category 1 anchor (continous spec. inspection) for cracked & uncracked concrete
- Tested in accordance to AC 308 for long term sustained load at standard and elevated temperature.
- Seismic resistance
- User friendly, low odour, styrene free & MMA free
- Meets LEED guidelines; low VOC
- Moisture insensitive, non sag formula
- Suitable for damp and water filled holes
- Shelf life 18 months, store cartridge at +5°C to +25°C before use
- Meet CSA A23.3-14, Annex D requirements
TYPICAL APPLICATIONS
- Rebar dowelling
- Highway and bridge construction
- Machine, crane and hoist installation
- Hollow wall anchoring applications
- Renovations
APPROVALS/LISTINGS
- IAPMO – ER0490
- 2015,2012.2009,2006 International Building Code (IBC)
- 2015,2012.2009,2006 International Residencial Code (IRC)
- MTO MI 120 Approved
- MTQ Approved
LIMITATION
- FLO-ROK® is not recommended for overhead applications
- Store cartridge at +5C° to +25C° before use